![]() ![]() ![]() RE: 5.1.0-alpha1 Firmware for Original Prusa MINI/MINI+ with Input Shaper and Prusa Connect! Only issue I've seen so far is that seams became more visible and will need some fine tuning. If the high cap for speed is 140mm/s, at around 14mm3/s flow this would be:Ġ.2 layer height ≈ 120mm/s max printing speedĠ.3 layer height ≈ 80mm/s max printing speedĠ.35 layer height ≈ 70mm/s max printing speedįor me the goal is to print as fast as possible withoutĪ) losing extruder steps (aka underextruding)ī) losing quality vs classic 'speed' profileĬ) worsening layer adhesion & mechanical properties. I have also set the layer height to 0.3 as it never reaches the max speed, you can also play with it. I set it at 14 to be conservative but feel free to play with it. PLA max flow should be around 15mm3/s (according to max flow on default 0.6mm profiles). ![]() ![]() So the main concept is that the machine can handle printing & vibrations as high as the 0.4 profile speeds and accelerations suggest, but it won't be able to heat up all the plastic with a 0.6mm.įor reference: 0.35 layer height * 0.6mm nozzle * 140mm/s = 29.4mm3/s vs 0.2 layer height * 0.4mm nozzle * 140mm/s = 11.2mm3/s Printing speeds are set as fast as 0.4 default profile but limited down by the Max volumetric speed (which will be the physical limit of the machine I guess). This will affect all print speeds at given 0.3mm layer height and 0.6mm nozzle are quite high. You can play with Max volumetric speed (Filament > Advanced). I have ported the 0.4 profiles to a 0.6 version.Ĭouldn't test the benchy yet, but for mechanical parts the machine works great! Up to its own volumetric flow limits for PLA + default hardware 0.6mm nozzle. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |